Racking Cane Holder to help hold your siphon or racking cane. Clips onto the side of plastic fermenters or to the neck of any carboy. Hose clip is 3/8" (0.925cm).

Turns a job that sometimes needs three hands into one that only needs two.

This is a bulk product - one unit equals 1 meter.

This hosing is 7.9mm inside diameter and is great for siphoning beer from one vessel to another. It is available in any length up to 25m. It is made of clear, non-toxic plastic and is suitable for contact with any food-grade liquid.

Not recommended as a beer line that holds beer over long periods of time. We recommend Ledavin as a beer line instead.

This is a bulk product - one unit equals 1 meter.

1/4" Tube Ledathane PE Natural, suitable for gas or beer line in your kegging set-up. This is stiff material and can be used for push in fittings.

This is a bulk product - one unit equals 1 meter.

3/8" Tube Ledathane PE Natural, suitable for gas or beer line in your kegging set-up. This is stiff material and can be used for push in fittings.

Commercial grade Equal Tee fitting, ideal for splitting your gas line to supply more than one keg.

A 5/16" John Guest plug, to block a 5/16" connection when it is not in use.

A 1/4" x 3/8" tube to hose adaptor with a 1/4" hose barb and a 3/8" push-fit connection.

This high quality beer line will keep your previous beverage in it's best possible conditoin in the process.

Pressure Rating (with 1.5safety factor)
30C - 1.4 MPa (200psi)
50C - 0.7MPa (100psi)