Fermenter Parts and Accessories
-
Vintage S-shape Airlock
Vintage S-shape Airlock. Our most popular airlock choice, used by generations of beer makers, distillers and wine-makers like. Includes a max fill line marking to ensure no liquid is sucked back into your fermenter when crash cooling or using a fermenter tap.
Compatible with standard fermenter grommet and bored bung sizes. -
Senior Airlock
Senior Airlock - three piece airlock designed to be easy to clean. This unit has a main body, which is used to house a small amount of liquid. There is a floating cap which sits over the hose in the middle of the main body. Finally there is a lid which holds the floating cap in place and creates the bubbling action.
Has a slightly larger external diameter fitting than the standard Vintage S-shaped airlocks, but is still compatible with standard fermenter grommets and bored bungs. -
Thermowell - Weldless, Multiple Sizes
A stainless steel thermowell for temperature probes. Designed for Ss Brew Tech products but the universal weldless design can be used with other fermenters.
- Brewer's Grade 304 Ss
- Installs into 17mm punched / drilled hole
- 6.5 mm inner diameter of tube openingAvailable in these sizes:
- 100mm
- 200mm
- 300mmIncludes one o-ring.
-
60cm Thermowell - 1/4inch Duotight Bulkhead Included
This thermowell fits into any 8mm Hole and can literally be installed into almost any fermenter lid.
Out of Stock -
FermZilla - All Rounder 30L/60L Base Support Webbing / Strap / Bridle / Carry Tie Down
This handy little strap will make cleaning and transport your FermZilla All Rounder 30L or 60L an absolute breeze. Simply attach through both sections of the base in the orientation you wish. Slide up and out of the little buckle pieces making sure that the buckle is facing towards you, then strap in and strap down!
The Strap is long enough for the 60L FZ-AR and 30L. We recommend rolling up the excess strap and paper clipping or cutting to suit the 30L. -
Ss HD Caster Wheels - for Unitanks / Chronicals / Brites
A set of heavy duty, all-stainless caster wheels with brake, designed for harsh brewery wash-down environments. - ideal for use with 64 litre and 1 bbl vessels - 3" (7.62cm) wheel diameter - 3/8" x 1.5" zinc coated stem - 113kg load rating per caster - includes stainless washer leveling kit The installation Guide can be found here. Note: not suitable for jacketed unitanks
From: Ss Brewtech
Out of Stock -
FermZilla - Conical - Replacement 27L Tank
You might be saying to yourself "Ahhh bugger! It was too hot..." and now you're here! Don't worry we have replacement tanks available for purchase. These are all pre-drilled and as clean as whistle.
Out of Stock -
Sterilock Odour Capsules (4)
For use with the Sterilock Airlock Contains 4 odour absorbing capsules to remove fermentation odours.