pH Buffer Solution - 3 Pack (4.00 / 6.86 / 9.18)

In order to keep your PH meter as accurate as possible, you will need to calibrate using our three buffer solutions. 
We would strongly recommend if you haven't used your ph meter in a while to always use a buffer solution before you start your brew.
If you do not have anyStorage Solution, we would also highly recommend you use this solution for storage after every use.
Directions for use:
1. Completely empty the powder into a clean 250mL glass beaker.
2. Add 250mL of deinoized water to the beaker.
3. Stir until the powder has completely dissolved.

pH solution is accurate to (-+) 0.01pH

A dial-type thermometer that is made for the SS Brewtech Brewmaster Kettles, although it could be used in any 1.5" tri-clamp situation. 

Thermometer:

• Dial Face: 3" -
• Tri-Clamp: 1.5"
• Range: -20-120 degrees C, 0-240 degrees F
• Accuracy: +/-1%
• Stem length: approx. 6cm (2.5")

Note: does not include tri-clamp gasket or clamp.

Digital instant read thermometer with folding probe.

A perfect pocket temperature probe for homebrewing and BBQ! Check the temperature of your mash, whirlpool additions, or use it to check the internals of that fine-looking lamb roast on the bbq! With a range of -50°C to 300°C you will be hard-pressed not to get a temperature reading.

Yellow RAPT Pill - Hydrometer & Thermometer (Wifi & Bluetooth).

The RAPT Pill allows true real-time specific gravity and temperature logging and control via wifi/bluetooth integration with the RAPT fermentation chamber, RAPT mobile app or RAPT IOT. 

This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.

Does not include clear Pill Housing and double o-rings shown in the images

RAPT Pill circuit board sold seperately

This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.

Does not include clear Pill Housing and double o-rings shown in the images

RAPT Pill circuit board sold seperately

This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other.

Does not include clear Pill Housing and double o-rings shown in the images

RAPT Pill circuit board sold seperately

Replace your RAPT Pill bottom housing with the RAPT Clear Housing shell. Please note there are no clear top pieces for the RAPT Pill at this stage.

RAPT Pill circuit board sold Separately
RAPT Pill O-Ring Set Sold Separately