Misc

  1. 1.9L Stainless Steel Growler with swing top
    $40.00

    1.9L Stainless Steel Growler with swing top

    Stainless Steel pressure storage vessel with swing top closure.

    The perfect companion for those that like to make beer, drink beer or think beer.

    Forget wasting time cleaning glass bottles & filling, then waiting weeks before you can drink your home brew.

    With carbonating in keg, then transferring to the S/S Growler, you can be drinking your liquid nectar within a few days.

    Simply fill the S/S Growler, and enjoy the contents over a few days ( or sooner if you're thirsty), then rinse clean and refill again, and again - EASY!

    If you haven't quite made it to home brewing yet, just take the S/S Growler down to your local craft brewery to fill.

    No more plastic takeaway bottles filling up land fills or the ocean. S/S Growlers are the perfect companion for the new generation of beer consumers. Customise your own with your own design, stickers, painting, branding etc.

     Re-fillable, re-useable  & environmentally friendly

    • Hygienic Stainless Steel & rubber closure
    • Easy to clean
    • Fridge friendly
    • Hand wash only
  2. 20 litre bladder for hand pump
    $4.60

    20 litre bladder for hand pump

    Reusable 20 litre bladder for hand pump. 

    As featured in this video showing you how to avoid creating suck-back into your fermenter when you crash cool. Normally used with the "Liquid ball lock adaptor for 20 litre bladder" (sold separately) which allows you to connect a liquid disconnect to the bag.

  3. 4mm ID Ledavin PVC tube / hose
    $5.50

    4mm ID Ledavin PVC tube / hose

    1 Review(s)
    This is a bulk product - one unit equals 1 meter.

    Clear 4mm ID Ledavin PVC tubing perfect for gas or beer line. Capable of fitting a standard disconnect barb, not suitable for push in fittings (without a barb to tube adapter).

    This is in our opinion the best beer line for home use, where you want the line as short as possible (kegerators, fridge mounted taps etc). It's got great line resistance, has a small diameter and therefore you need a much shorter hose to supply the needed line resistance.
  4. 5 in 1 Faucet Spanner/Wrench 5 in 1 Faucet Spanner/Wrench
    $8.00

    5 in 1 Faucet Spanner/Wrench

    This handy tool is exactly what you need to fit numerous dispensing applications: - The 27mm nut to attach the tap to your font. - The ring collar that tightens the faucet to the tap shank. - The type 30 nut to attach your regulator to your CO2 bottle - The FFL fitting to go onto an MFL connection - A bottle opener
  5. Adjustable Pressure Relieve Valve with Gauge (Spunding Valve) Adjustable Pressure Relieve Valve with Gauge (Spunding Valve)
    $33.00

    Adjustable Pressure Relieve Valve with Gauge (Spunding Valve)

    Adjustable Pressure Relieve Valve with Gauge (Spunding Valve). Relieves pressure while filtering from one keg to another or allows you to accurately naturally condition in the keg by setting the desired venting pressure. Adjustable up to 100kPa (15psi).
    To adjust the pressure you need to wind/unwind the end of the valve.

    Note: The grey ball lock disconnect is sold separately

  6. Beer Growler - Ultimate - 2 Litre Beer Growler - Ultimate - 2 Litre
    $35.00

    Beer Growler - Ultimate - 2 Litre

    The Ultimate Growler is made from 304 Stainless Steel that is completely impervious to oxygen and sunlight (UV) meaning your precious amber liquid is in the absolute best storage container possible.

    The Growler also comes with double wall vacuum insulation, helping to keep your beer cold for hours.

    Most screw top growlers struggle to hold the pressure required to keep beer fresh and carbonated. The Ultimate Growler comes with a spring wired lid capable of holding up to 40psi.

  7. Blowtie Diaphragm Spunding Valve - Adjustable Pressure Relief Valve
    $23.10

    Blowtie Diaphragm Spunding Valve - Adjustable Pressure Relief Valve

    If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.

    The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure.

    This unit can be easily dissassembled for cleaning using a phillips head screw driver.

  8. Bottle Filler Beer Gun
    $89.00

    Bottle Filler Beer Gun

    Bottle Filler Beer Gun - fill your bottles from a keg with minimal oxygen exposure for increased shelf stability. Has two triggers: one to purge your bottle with CO2, and one to start filling. All components in contact with liquid are stainless steel or silicone.
  9. Carbonation Cap SS Carbonation Cap SS
    $22.90

    Carbonation Cap SS

    The post on this unique carbonation cap has been machined to fit BOTH the black/liquid and grey/gas ball lock disconnects. This carbonation cap also includes a barbtail on the underside so you can attach some beer line to act as a dip tube.

    This allows the carbonation cap to be used in several different ways including:
    1. Carbonate
    2. Cleaning your beer lines
    3. Use it to counter pressure bottle fill PET bottles

  10. Clamp Crimper Clamp Crimper
    $10.00

    Clamp Crimper

    A hose clamp crimping tool made from hardened steel with an anti-slip rubberised grip. We recommend oetiker clips for ensuring leak-free connections on all beer and gas line applications. This clamp crimper is the ideal tool to use when applying oetiker clips.

    Size: 220mm
    From: Krome Dispense