Fermenter Parts and Accessories
-
FermZilla Tri-Conical - 3 Inch x 2 Inch Tri-Clamp Butterfly Valve
FermZilla Tri-Conical - 3 Inch x 2 Inch Tri-Clamp Butterfly Valve.
Compatible with the 27L and 55L FermZilla Tri-Conical Series, or any 2 and 3 Inch Tri-Clamp fittings.
-
Blow Off Barb For FTSs and Ss Brew Bucket Lids
Blow Off Barb For FTSs and Ss Brew Bucket Lids.
- Custom tooled specifically for FTSs/Brew Bucket lids
- Fits into blow off / airlock hole
- 1/2" hose barb
- 304 Stainless construction
- Includes 1 spare o-ring (1 o-ring for use / 1 spare) -
Leg Extensions for Ss Chronical 52L and 64L Fermenters
Leg Extensions for Ss Brew Tech Chronical 52L and Chronical 64L fermenters.
- Made from 304 Stainless Steel
- Finish matches Chronical legs
- 3/8" male stem on top (insert to legs)
- 3/8" female on bottom (for casters/feet)
- Approx. 25cm (10") total lengthSold as a set of four.
Out of Stock -
Carbonation Stone - Tri-Clamp
A carbonation stone designed with a removable and replaceable carb stone. Ideally suited to Ss Brewtech unitanks up to 1bbl.
- 1.5" Tri-Clamp
- 3/8" Hose barb valve
- 0.5 Micron stainless steel carb stone
Note: it needs a minimum 19mm inner diameter tee to be used in an oxygenation kit.
-
Ss Brew Bucket Ball Valve and Racking Arm
A replacement ball valve and racking arm for Ss Brew Tech Brew Buckets.
Features:
- 3/8" Mini Ball Valve
- 304 Stainless Steel
- racking arm
- all O-rings included -
HS White 30L Fermenter Bucket Lid with Hole
Food grade plastic lid with pre-drilled grommet hole for Handcraft Supplies 30L Fermenter. Also fits the Kegland 30L Fermenter Bucket. -
FermZilla - Handle
A stainless steel handle for FermZilla units. These handles are made from 304 stainless steel and suit the large family of FermZilla fermenters/uni tanks/bright tanks.
The handles are made from 5.5mm thick 304 grade stainless steel and held together with stainless bolts.
These handles are suitable to take load up to 100kg.
-
Inline Oxygenation Kit
The Ss Brewtech Inline Oxygenation Kit, designed to oxygenate wort during transfers to Brewmaster Chronicals and Unitanks.
- Fully welded oxygen stone, with all sanitary 1.5" tri-clamp connections
- 1.5" tri-clamp oxygen stone, 1.5" tri-clamp Micro Tee, and 1.5" tri-clamp Sight Glass
- (2) 1.5" tri-clamp clamps, and (2) 1.5" tri-clamp gaskets included
- 3/8" barbed oxygen inlet with ball valve to control flow
- All 304 stainless construction
-
FermZilla All Rounder - 30L Jacket
This jacket will keep your FermZilla All Rounder 30L cool in summer and warm in winter. It can also be used with a heater belt to warm up the wort if the heat from the fermentation isn't enough. To control the temperature, we suggest using a MKII Programmable Temperature Controller.
This jacket also completely blocks any light/UV to prevent light struck or skunked beer.