Taps, Towers and Accessories

  1. Triple Tap Beer Tower for Kegerator (with taps) C508
    $200.00

    Triple Tap Beer Tower for Kegerator (with taps) C508

    Triple Tap Beer Tower for Kegerator Triple Tap Beer Tower for dispensing your beer from kegs.
  2. Chrome plated brass tap handle – long slender type Chrome plated brass tap handle – long slender type
    $13.00

    Chrome plated brass tap handle – long slender type

    A chrome plated brass handle for beer taps. Fits most faucets.

    Pairs exceptionally well with the stainless steel Nukatap or intertap for a sleek shiny look - total bling for any home kegerator or keezer.
  3. Beer Tower - Double Tap - C175 Beer Tower - Double Tap - C175
    $150.00

    Beer Tower - Double Tap - C175

    Double Tap Beer Tower for dispensing your beer from kegs with stainless steel font. Includes faucets and handles, mounting hardware and gasket.

    Body: 3" Stainless Steel Double Faucet Font
    Total Height: approx. 30cm
    Finish: SS Polished
    Beer Contact Material: Chrome Plated Brass

    Out of Stock
  4. Decal holder 82mm chrome plated plastic
    $12.95

    Decal holder 82mm chrome plated plastic

    Jazz up your Kegerator or commercial beverage dispensary with these stylish decal holders. Made from plated chrome plastic, with soft padding components as to not scratch your taps when attached are surely there to catch your eye.

    These decal holders will fit any tap system. Their unique clamp on design means you don't have to take off your tap to put these on. You will need a phillips head screw driver to remove the two screws.

  5. Decal holder 82mm copper plated plastic
    $23.50

    Decal holder 82mm copper plated plastic

    Decal holder 82mm copper plated plastic
    Out of Stock
  6. Krome Beer Tap Shank - 70mm (C318) Krome Beer Tap Shank - 70mm (C318)
    $24.95

    Krome Beer Tap Shank - 70mm (C318)

    A chrome plated brass shank 70mm long for your beer tap, with a barbed 6.35mm outlet.
    Out of Stock
  7. Krome Beer Tap Shank - 140mm (C327)
    $34.95

    Krome Beer Tap Shank - 140mm (C327)

    A chrome plated brass shank 140mm long for your beer tap, with a barbed 6.35mm outlet.

    Length: approx. 140mm (2-3/4")
    From: Krome Dispense

    A shank is used to attach a beer tap to a housing (i.e. a fridge door) and to the beer line.
    The length of the beer shank determines how thick the wall/door can be you can attach the beer tap to.
    Out of Stock
  8. Neoprene washer for 5/8" hex nut and barbtails
    $1.00

    Neoprene washer for 5/8" hex nut and barbtails

    Ensures there are no leaks when using a 5/8" hex nut and an angle or straight barbtail.

    The purpose of Neoprene washers is to create a tight fitting seal. The flexibility of rubber means that the bearing surface can be compressed for a tight fit. The neoprene also provides effective protection against corrosion.
  9. Dual Tap Font Tower 304 Stainless Steel
    $60.00

    Dual Tap Font Tower 304 Stainless Steel

    Nothing is quite like the quality and robustness of stainless steel. These 304 grade brushed stainless steel fonts are corrosion resistant and look great.

    These quality made fonts are also well insulated with a closed cell insulation foam fits the inside of the font snugly preventing unwanted heat ingress into your precious amber beverage. These fonts also will not corrode like the other cheaper chrome plated steel fonts that are common in NZ/Australia.

    Specifications:
    - 340mm Tall (without taps)
    - 78mm Diameter
    - Base Collar Diameter 111mm
    - Internal Foam Insulation

    Note: does not include taps

  10. Beer Gun Dispenser (Pluto gun) Beer Gun Dispenser (Pluto gun)
    $82.00

    Beer Gun Dispenser (Pluto gun)

    Beer Gun Dispenser (Pluto gun) - for hand dispensing your beer from your keg. Much less flimsy and more durable than a picnic tap. Attaches with a barb to your beer line. Made of stainless steel
    Out of Stock