Mini Kegs

  1. Mini Keg 5L (175mm x 280mm) Mini Keg 5L (175mm x 280mm)
    $65.00

    Mini Keg 5L (175mm x 280mm)

    This small sized mini keg is conveniently shaped so it will fit into most coolers/eskys. This size will also will fit most standard domestic fridges so it's easy to store without having to buy a new fridge. 

    The 5L size is equivalent to 15 x 330ml Bottles of beer.

  2. Mini Core 360 Adaptor for 74g Cartridge Mini Core 360 Adaptor for 74g Cartridge
    $4.95

    Mini Core 360 Adaptor for 74g Cartridge

    Mini Core 360 Adaptor for 74g Cartridge/Bulb (G1/2 Male x 5/8-18UNF Female).

    This adaptor for the Core 360 Mini Regulator will allow you to use the oversized disposable 74gram co2 bulbs so you can take your keg system anywhere.

  3. 8L Oxebar - Mono - Polymer Keg with Cap and Handle 8L Oxebar - Mono - Polymer Keg with Cap and Handle
    $25.00

    8L Oxebar - Mono - Polymer Keg with Cap and Handle

    This 8L keg is light weight, compact and has high oxygen barrier properties with 3x better(less) gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages.

    This product is sold with the PCO38 cap however if you would like to dispense this product through a draft system we recommend the use of the PCO38 Tapping Head (KL20169).  The tapping head is sold separately and allows you to attach standard ball lock disconnects and pressure reliefvalve to the top of this keg design.


    What is Oxebar Mono
    Oxebar Mono is a PET polymer blend that utilises several polymers blended together to significantly improve gas barrier properties. When compared with standard PET plastic Oxebar Mono is able to reduce oxygen ingress and CO2 loss so your precious beverage is preserved and shelf life extended by x3. We recommend this product for beer stored in keg up to 6 months.

    Dimensions
    Diameter:155mm
    Height: 520mm

    Out of Stock
  4. PCO38 Tapping Head (Lid only) PCO38 Tapping Head (Lid only)
    $8.00

    PCO38 Tapping Head (Lid only)

    3 x PCO1881 Male Threads to PCO38 Female Thread


    The PCO38 keg system is an inexpensive keg system that utilises quality engineering plastics and efficient injection stretch blow mold processes to manufacture economical kegs and tapping heads for both home brewing and commercial beers.

    This particular tapping head kit is designed to be used in conjunction with a 35psi/2.5bar pressure release valve.
    1 x KB10537 - Red PRV 1881 Cap Combo (35psi/2.5bar)
    Do not exceed recommended pressure of 35psi.

    The PCO Kegs come in a range of sizes:
    8L PET Keg
    4L PET Keg - coming soon

  5. Mangrove Jack's 5L Mini Keg Kit
    $159.50

    Mangrove Jack's 5L Mini Keg Kit

    Portable size
    Can pressure carbonate (using the ball lock cap)
    No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg 
    Perfect for smaller experimental batches
    Handles for easy transportation
    Stainless steel body
    Embossed logo

    Kit Contents:
    Mangrove Jack's Mini Keg 5L
    Mangrove Jack's Mini Kegs Ball Lock Cap
    Mangrove Jack's Mini Kegs Diptube Hosing

     

    Diamensions 180mm W x 290mm H

    NOTE: These do not come with a tap, however they can be used with and ball lock tap and therefore complement existing kegerator setups.

  6. PCO38 Tapping Head Assembly Kit with Ball Lock Posts, Dip Tube and PRV PCO38 Tapping Head Assembly Kit with Ball Lock Posts, Dip Tube and PRV
    $19.95

    PCO38 Tapping Head Assembly Kit with Ball Lock Posts, Dip Tube and PRV

    This PCO38 tapping head assembly has been designed to suit standard PCO38 bottle necks such as the 8L PET keg.

    The PCO38 keg system is a inexpensive keg system that utilises quality engineering plastics and efficient injection stretch blow mould processes to manufacture economical kegs and tapping heads for both home brewing and commercial beers.

    This particular tapping head kit comes included with 2.5bar pressure relief valve, liquid and gas ball lock posts and dip tube.

    The plastics used in the tapping head can withstand a wide range of chemicals used in the brewing industry and relatively high temperatures (over 100C).

    NOTE: The 8L keg shown in the photos is not included.

  7. Replacement Silicone Elbow for PCO38 Tapping Head Replacement Silicone Elbow for PCO38 Tapping Head
    $1.50

    Replacement Silicone Elbow for PCO38 Tapping Head

    This silicone elbow is a replacement for the elbow provided in the PCO38 Tapping Head Kit.

    Allowing for a 90 degree connection between the barb on the yellow liquid plastic carbonation cap and the 6.3mm OD dip tube provided in the kit.

  8. Replacement PCO38 Wedge Seal Cap
    $2.00

    Replacement PCO38 Wedge Seal Cap

    Replacement lid for PCO38 PET kegs.

    Please note: All PCO38 kegs do not have a washer/seal/o-ring. It uses a wedge compression sealing much like a Coca-Cola Bottle does.

  9. Mangrove Jack's Mini Keg 10L
    $144.95

    Mangrove Jack's Mini Keg 10L

    No bottling or wasting that little bit left over from standard sized 23L batches and a 19L keg and perfect for smaller experimental batches.

    • Portable size
    • Pressure carbonate (using the ball lock cap)
    • Stainless steel body
    • Handles for easy transportation
  10. Glow in the Dark Mini Keg Neoprene Keg Parka / Jacket - 8-10L Kegs Glow in the Dark Mini Keg Neoprene Keg Parka / Jacket - 8-10L Kegs
    $19.95

    Glow in the Dark Mini Keg Neoprene Keg Parka / Jacket - 8-10L Kegs

    An insulated, neoprene jacket for mini kegs with glow-in-the-dark Kegland branding. Great for BBQs, camping, or parties.

    Features:

    1. 8mm thick neoprene. Most other keg jackets are only 4mm meaning they simply do not insulate as well.
    2. 16gram CO2 bulb pockets.
    3. Velcro around the top so you can attach various accessories.
    4. Comes with heavy duty webbing shoulder strap.