Fermenter Parts and Accessories
-
Carbonation Stone - Tri-Clamp
A carbonation stone designed with a removable and replaceable carb stone. Ideally suited to Ss Brewtech unitanks up to 1bbl.
- 1.5" Tri-Clamp
- 3/8" Hose barb valve
- 0.5 Micron stainless steel carb stone
Note: it needs a minimum 19mm inner diameter tee to be used in an oxygenation kit.
-
Leg Extensions for Ss Chronical 52L and 64L Fermenters
Leg Extensions for Ss Brew Tech Chronical 52L and Chronical 64L fermenters.
- Made from 304 Stainless Steel
- Finish matches Chronical legs
- 3/8" male stem on top (insert to legs)
- 3/8" female on bottom (for casters/feet)
- Approx. 25cm (10") total lengthSold as a set of four.
Out of Stock -
Blow Off Barb For FTSs and Ss Brew Bucket Lids
Blow Off Barb For FTSs and Ss Brew Bucket Lids.
- Custom tooled specifically for FTSs/Brew Bucket lids
- Fits into blow off / airlock hole
- 1/2" hose barb
- 304 Stainless construction
- Includes 1 spare o-ring (1 o-ring for use / 1 spare) -
Thermowell - Weldless, Multiple Sizes
A stainless steel thermowell for temperature probes. Designed for Ss Brew Tech products but the universal weldless design can be used with other fermenters.
- Brewer's Grade 304 Ss
- Installs into 17mm punched / drilled hole
- 6.5 mm inner diameter of tube openingAvailable in these sizes:
- 100mm
- 200mm
- 300mmIncludes one o-ring.
-
60cm Thermowell - 1/4inch Duotight Bulkhead Included
This thermowell fits into any 8mm Hole and can literally be installed into almost any fermenter lid.
-
FTSs Controller Mounting Bracket
A mounting bracket for Ss Brewtech fermenters. Mounts to the vessel's thermowell port for all Chronical fermenters and standard Brite Tanks, or to the tri-clamp bracket for Unitanks and Brewmaster Brite Tanks. - Custom tooled shelf for FTSs controllers - Thermowell Bracket is matte black - Tri-Clamp Bracket is 304 Stainless From: Ss Brewtech -
FermZilla - Handle
A stainless steel handle for FermZilla units. These handles are made from 304 stainless steel and suit the large family of FermZilla fermenters/uni tanks/bright tanks.
The handles are made from 5.5mm thick 304 grade stainless steel and held together with stainless bolts.
These handles are suitable to take load up to 100kg.
-
Inline Oxygenation Kit
The Ss Brewtech Inline Oxygenation Kit, designed to oxygenate wort during transfers to Brewmaster Chronicals and Unitanks.
- Fully welded oxygen stone, with all sanitary 1.5" tri-clamp connections
- 1.5" tri-clamp oxygen stone, 1.5" tri-clamp Micro Tee, and 1.5" tri-clamp Sight Glass
- (2) 1.5" tri-clamp clamps, and (2) 1.5" tri-clamp gaskets included
- 3/8" barbed oxygen inlet with ball valve to control flow
- All 304 stainless construction
-
Dosing Pistol
This handy little device enables you to add clarifier / finings to your beer that is in a pressurised fermenter. You can add your claifier / finings to your beer with no exposure to oxygen whilst still under pressure.