Stainless steel tri-clamp cap (1.5") to 1/4″ (6.35mm) Hose Barb.

• Made out of 304 Stainless Steel
• 1/4″ OD Hose Barb
• Designed for use with 1/4″ ID tubing

A 22mm Hole Plug with o-rings and attachment nut, used to plug thermometer, ball valve, and kettle top recirculation holes on Ss Brewtech kettles.

A stainless steel plate to close, or blank off an outlet. Sometimes it is referred to as a blind cap.

Currently available in these sizes:
- 1.5" (3.81cm)
- 2" (5.08cm)
- 3" (7.62cm)

A 1.5" tri-clamp cap to male camlock adapter.

Replacement silicone Tri-Clamp Gasket, suitable for all standard tri-clamp fittings. These are all beaded to fit the tri-clamp groove unless specified otherwise.

Currently available in these sizes:

• 3.81cm (1.5")
• 5.08cm (2") (flat, not beaded)
• 5.08cm (2") - (also used as Grainfather conical plug seal)
• 7.62cm (3")
• 10.16cm (4")
• 15.24cm (6")
•  20.32 (8")

Note: photo shows 7.62cm (3") beaded option. Colour may vary.

4 Inch to 1.5 Inch Tri-Clamp Reducer.

This is a 1.5 and 4 inch tri-clamp that will fit most standard 1.5 inch and 4 inch tri-clamp hardware.

The tri-clamp system has been a common connection type in the food processing industry and medical industry as its easy to clean, sanitary and no threads are exposed to the product contained in the fittings.

A stainless steel Tri-Clamp Cap with a 25mm (1") Barb fitting. Great for yeast dumping with Ss Brewmaster Chronicals.

- 304 stainless steel 
- 1.5" tri-clamp 
- 1" OD hose barb