Connections and Valves

Position
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
10
  1. Camlock – Type B female x 1/2 inch male Camlock – Type B female x 1/2 inch male
    $13.00

    Camlock – Type B female x 1/2 inch male

    Camlock – Type B female x 1/2 inch male

    Stainless Steel - 150psi/11Bar Operating Pressure
  2. Camlock – Type D female x 1/2 inch female
    $13.00

    Camlock – Type D female x 1/2 inch female

    Camlock – Type D female x 1/2 inch female

    Stainless Steel - 150psi/11Bar Operating Pressure
  3. Camlock – Type E male x 1/2 inch barb Camlock – Type E male x 1/2 inch barb
    $10.00

    Camlock – Type E male x 1/2 inch barb

    Camlock – Type E male x 1/2 inch barb

    Stainless Steel - 150psi/11Bar Operating Pressure
  4. Tri-Clamp Pressurised Transfer Fitting
    $39.00

    Tri-Clamp Pressurised Transfer Fitting

    1.5 Inch Tri-Clamp Pressurised Transfer Fitting" 
    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.

    Fits Chronical Fermenter Lid - 1.5"

  5. Tri-clamp Cap 1.5" with 13mm Barb
    $12.95

    Tri-clamp Cap 1.5" with 13mm Barb

    Tri-clamp Cap with 13mm Barb

    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.
  6. Tri-clamp 3"
    $23.50

    Tri-clamp 3"

    Tri-clamp 3 inch

    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.
    Out of Stock
  7. Tri-clamp 1.5" Tri-clamp 1.5
    $12.90

    Tri-clamp 1.5"

    Tri-clamp 1.5 inch / 3.81cm. A quality stainless steel tri-clamp with 1.5" being the most common tri-clamp size.

    We also stock tri-clamp seals and a range of fittings that are compatible with this diameter of tri-clamp.

    Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.
  8. Nut – with recess for seated o-ring (1/2 bsp)
    $5.90

    Nut – with recess for seated o-ring (1/2 bsp)

    1/2 BSP Stainless Steel Nut with a recess for an o-ring
    Out of Stock
  9. Shut Off Valve - MFL With Return Check Valve
    $14.95

    Shut Off Valve - MFL With Return Check Valve

    A gas shut off valve with built in return check valve and MFL nipple.
  10. Tri-Clamp Tee - Micro 1.5" Tri-Clamp Tee - Micro 1.5
    $34.95

    Tri-Clamp Tee - Micro 1.5"

    A tri-clamp tee fitting. This is the micro version
    Out of Stock
Position
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
10