Pumps Filters and Bags

  1. Stainless Pump Head for MKII Magnetic Drive Pump (65W) Stainless Pump Head for MKII Magnetic Drive Pump (65W)
    $54.95

    Stainless Pump Head for MKII Magnetic Drive Pump (65W)

    A stainless steel pump head for the 65watt MKII High Temperature Magnetic Drive Pump, with 3/4" BSP threads. Designed as a replacement/upgrade for the plastic pump head that comes as standard with the original pump. From: Kegland.
  2. Filter - Inline, Push Fit (10mm) Filter - Inline, Push Fit (10mm)
    $24.95

    Filter - Inline, Push Fit (10mm)

    A rugged and durable push fit, inline filter strainer. Available in 10mm push fit size.

    The detachable cap and body allow for easy servicing and cleaning.

    Out of Stock
  3. 2 Inch Tri Clover Stainless Mesh Screen PTFE (Teflon)
    $15.95

    2 Inch Tri Clover Stainless Mesh Screen PTFE (Teflon)

    This Stainless Mesh Screen has a PTFE (Teflon) seal integrated around the outside of it.  The hard PTFE compount is highly chemical and heat resistant.  This can be used as a standard seal or alternatively it can be used as a filter screen preventing the flow of large prticulates going through your tri-clover fittings.

    This fitting is often used for distillation to retain packing medial or used in pot distillation to retain botanicals in the vapour stream.

    Out of Stock
  4. BIAB - High Quality Polyester Hop stocking 13cm x 58cm BIAB - High Quality Polyester Hop stocking 13cm x 58cm
    $4.95

    BIAB - High Quality Polyester Hop stocking 13cm x 58cm

    Brand new Hop Sock design with far stronger stitching all the way around. Suited for dry hopping or steeping grain or spices in the boil. If you have a Heat Exchanger, we would highly recommend bagging your hops if you're going to do a NEIPA or DIPA, as it may clog your plates or even your pump! Rated up to 110C it is the perfect tool for an easier clean up regime.

    This can also be used to steep malted grain, or literally anything you need to use like a tea bag. 

    Dimensions:
    130 x 580 mm

  5. Hop Straining Bag with drawstring - small
    $4.95

    Hop Straining Bag with drawstring - small

    A reusable hop straining bag made from nylon mesh. Designed to go with the Krome Kettle Spiders or straight over the top of your pot, but would also be good for generally steeping hops or dry hopping, or for adding other things like oak chips to your brew. It's also easy to clean and sanitise.

    Sizes approx. 200mm x 200mm (Small)

    Out of Stock
  6. 8cm Funnel
    $5.40

    8cm Funnel

    This funnel has a span of approximately 8cm, and an external diameter of approximately 0.7cm at the bottom. The overall height is approximately 7.5cm.
  7. 15cm Funnel
    $8.50

    15cm Funnel

    This funnel has a span of approximately 15cm, and an external diameter of approximately 1.5cm at the bottom. The overall height is approximately 15.5cm.
    Out of Stock
  8. Grainfather Pump - UK/EU/NZ/AU/SA Grainfather Pump - UK/EU/NZ/AU/SA
    $257.95

    Grainfather Pump - UK/EU/NZ/AU/SA

    Pressure: Low pressure Name: magnet water pump Pump Design: magnetive drive circulation pump Max Flow: 11/12LPM Voltage: 220V AC-230V AC Self Priming: 3 Meters Duty Cycle: Intermittent Flow Rate:: 11/12L/min Max Head: 1.5/2.1M
  9. Mesh screen insert for 26cm and 30cm Funnels
    $10.00

    Mesh screen insert for 26cm and 30cm Funnels

    A mesh insert that is designed to fit inside the 26cm and 30cm plastic funnels, which allows you to filter out solids from the liquid you are passing through the funnel.

    The mesh is a fine metal screen with a diameter of 95mm. Product includes a small tab which helps you remove the mesh from the funnel, if you insert it in the right way up to begin with.

  10. 30cm Plastic Funnel (including mesh filter)
    $31.50

    30cm Plastic Funnel (including mesh filter)

    A general all-purpose plastic funnel with a top diameter of 30cm. The external diameter of the bottom of the funnel is 28mm