Pumps Filters and Bags

  1. Filter Bag: Large Coarse (Winemaking)
    $21.80

    Filter Bag: Large Coarse (Winemaking)

    Filter Bag: Large Coarse (Winemaking)
  2. Beer Filter Housing
    $49.00

    Beer Filter Housing

    10 inch Beer Filter Housing for filtering your beer prior to bottling or kegging. 

    - High pressure housing
    - Compatible with other 10" filter systems

    You will need a filter insert to use this system. It also requires threaded hose barbs for the in and out ports.

  3. Filter Bag: Large Fine (Winemaking)
    $24.20

    Filter Bag: Large Fine (Winemaking)

    Filter Bag: Large Fine (Winemaking)
  4. Replacement Screen - Bouncer Classic
    $18.00

    Replacement Screen - Bouncer Classic

    Replacement screen assortment for Classic Bouncer Inline Filter.
  5. Hop Straining Bag 125mm x 220mm Hop Straining Bag 125mm x 220mm
    $3.80

    Hop Straining Bag 125mm x 220mm

    A reusable hop straining bag made from nylon mesh. Good for steeping hops or dry hopping, or for adding other things like oak chips to your brew. It's also easy to clean and sanitise.
  6. Mac Daddy Bouncer Filter
    $75.00

    Mac Daddy Bouncer Filter

    It’s the Mac Daddy! Similar to the standard-sized Bouncer Inline Beer Filter - but BIGGER. 

    The Mac Daddy Bouncer Filter allows you to brew better tasting and clearer beer, with less waste, and without pumps or additives! Simply connect the filter between your racking cane and keg, or between your boil kettle and fermenter.

  7. Ss Sight Glass - 19cm Inline
    $87.00

    Ss Sight Glass - 19cm Inline

    While it is designed for use with Chronical fermenters it can be used in any setting with 1.5" tri-clamp fittings. It can also be used as a yeast collection container.
  8. Stainless Pump Head for MKII Magnetic Drive Pump (25W)
    $39.00

    Stainless Pump Head for MKII Magnetic Drive Pump (25W)

    Stainless Pump Head for MKII Magnetic Drive Pump (25W)
  9. Hop Bomb 70mm diameter with 40cm chain
    $9.90

    Hop Bomb 70mm diameter with 40cm chain

    The hop bomb is ideal for containing pelletised hops or hop flowers. The hop bomb can fit up 30 grams of pelletised hops in the bomb, at 30 grams it will approximately half fill the hop bomb leaving enough space for the hops to move and for you to get efficient extraction of the hop bitterness and aroma. It is ideal for hop additions in the boil. The 30cm stainless chain can be used to attach the hop bomb to the side of your boil kettle or pot. The hop bomb is also ideal for use inside 19L kegs if you have a lid with an internal hook.
  10. MKII High Temperature Magnetic Drive Pump
    $119.00

    MKII High Temperature Magnetic Drive Pump

    This pump is constructed of food-grade materials and handles boiling wort with ease. The impeller housing is made from polysulfone as it is a tough, food-grade plastic rated up to 120C. The magnetic drive acts as a clutch allowing the user to put back pressure on the pump to slow down flow without any damage to the pump. Since it is magnetic drive, it’s not self priming, you must put the pump under the level of the liquid source. This is an extremely efficient 1.1amp pump which can be run continuously at elevated temperatures. The magnetic drive ensures no lubricated bearings are in contact with the liquid at all, so you can be sure there is no chance of any contamination of the liquid being pumped, which is why this pump is ideal for home brewing. Voltage: 220-240 at 50-60hz Max Head: 3.4m Max Flow: 19L/min Wiring: Requires wiring Fittings: 1/2 BSP Note: the pump does not include any of the quick connects, camlocks or ball valves shown in the images these are just to show how you can set the pump up to incorporate it into your brewery.