Connectors

  1. 1/2" x 1/2" John Guest tube to hose adaptor 1/2
    $11.00

    1/2" x 1/2" John Guest tube to hose adaptor

    A 1/2" x 1/2" John Guest tube to hose adaptor to connect a 1/2" hose to a 1/2" push-fit connection.
  2. 1/4" John Guest Equal Tee 1/4
    $12.00

    1/4" John Guest Equal Tee

    Commercial grade Equal Tee fitting, ideal for splitting your gas line to supply more than one keg.
  3. 13mm stainless steel joiner 13mm stainless steel joiner
    $8.00

    13mm stainless steel joiner

    13mm stainless steel joiner
  4. 5/16" John Guest Equal Straight Connector 5/16
    $6.80

    5/16" John Guest Equal Straight Connector

    Commercial grade Equal Straight Connector, ideal for joining two 5/16" tubes together.
  5. 6mm stainless steel joiner
    $8.00

    6mm stainless steel joiner

    6mm stainless steel joiner from 304 stainless steel.

    Barb on both sides to join 4mm-6mm inner diameter hoses. Strongly recommended to use Oetiker clamps to secure the connection.
  6. Adaptor 5/16 x 1/4 bsp Adaptor 5/16 x 1/4 bsp
    $9.90

    Adaptor 5/16 x 1/4 bsp

    adaptor 5/16 x 1/4 bsp.
  7. Ball Lock Multipost
    $10.00

    Ball Lock Multipost

    This handy ball lock post fits both gas and liquid ball lock connectors, and is compatible with standard cornelius type kegs.

    This can be really handy for daisy chaining beer kegs together and for many other reasons. It's also handy if you want to be able to push gas down your dip tube to make your kegs carbonate faster.

    A keg post poppet is also included.

  8. Barbed Swivel Nut - 1/4" Barbed Swivel Nut - 1/4
    $5.00

    Barbed Swivel Nut - 1/4"

    A Barbed Swivel Nut, often used for MFL fittings.

    Bore size 6.35mm (1/4")

  9. Barbed Swivel Nut - 3/16" Barbed Swivel Nut - 3/16
    $5.00

    Barbed Swivel Nut - 3/16"

    A Barbed Swivel Nut, often used for MFL fittings.

    Bore size 4.76mm (3/16")

  10. Duotight - 8mm Ball Valve
    $5.00

    Duotight - 8mm Ball Valve

    Duotight - 8mm shut off ball valve. This is an equal ball valve to take 8mm OD tubing in both sides.

    No clamps necessary, however we do recommend cutting your hosing straight, not on an angle, to ensure the line has a complete seal. To remove the fitting simply push in the collet and the hose can be removed. These push in fittings are suitable to be used up to 100 psi.

    These push in fittings have been engineered for maximised performance in both gas and liquid applications. Duotight takes the double safety approach to all of the connections with two EPDM o-rings per hose port. 

    Note: colour may vary.

    From: Kegland