Misc

  1. Liquid Ball Lock Post with 5/8 Thread
    $19.00

    Liquid Ball Lock Post with 5/8 Thread

    Liquid Ball Lock Post with 5/8" Thread. These are a very popular accessory that allows you to convert a commercial keg coupler with 5/8" thread to a standard corny disconnect liquid post. This is the simplest way to allow you to serve beer from commercial kegs in a standard homebrew kegerator or keezer without modifying your beer and gas lines.

  2. Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly
    $20.00

    Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly

    These ball lock posts include a 1/4 inch BSP thread so you can attach it to a wide range of other fittings.

    The posts include a 20mm long thread, an o-ring, poppet, locking nut and short dip tube. This would enable you to make a keg out of any pressure vessel if you wanted to. The assembly can also be fitted to regulators, gas manifolds and various other items.

    Both Gas and Liquid posts available.

    From: Kegland
  3. Carbonation Cap SS Carbonation Cap SS
    $22.90

    Carbonation Cap SS

    The post on this unique carbonation cap has been machined to fit BOTH the black/liquid and grey/gas ball lock disconnects. This carbonation cap also includes a barbtail on the underside so you can attach some beer line to act as a dip tube.

    This allows the carbonation cap to be used in several different ways including:
    1. Carbonate
    2. Cleaning your beer lines
    3. Use it to counter pressure bottle fill PET bottles

  4. Cylindrical hop bomb for dry hopping in keg (70mm x 180mm)
    $17.90

    Cylindrical hop bomb for dry hopping in keg (70mm x 180mm)

    Long cylindrical hop bomb for kegging - perfect for dry hopping in the keg. Only fill to no more than 50% by volume - hop pellets expand significantly when wet.

    Dimensions: 70mm wide x 180mm long
  5. Adjustable Pressure Relieve Valve with Gauge (Spunding Valve) Adjustable Pressure Relieve Valve with Gauge (Spunding Valve)
    $33.00

    Adjustable Pressure Relieve Valve with Gauge (Spunding Valve)

    Adjustable Pressure Relieve Valve with Gauge (Spunding Valve). Relieves pressure while filtering from one keg to another or allows you to accurately naturally condition in the keg by setting the desired venting pressure. Adjustable up to 100kPa (15psi).
    To adjust the pressure you need to wind/unwind the end of the valve.

    Note: The grey ball lock disconnect is sold separately

  6. Quick Disconnect - Female to 1/2" Female BSP Quick Disconnect - Female to 1/2
    $15.50

    Quick Disconnect - Female to 1/2" Female BSP

    Stainless Steel Female Quick Disconnect with 1/2" Female BSP Fitting. Allows you to easily change lines when moving liquids around. 

    Includes a food grade O-ring.

  7. Bottle Filler Beer Gun
    $89.00

    Bottle Filler Beer Gun

    Bottle Filler Beer Gun - fill your bottles from a keg with minimal oxygen exposure for increased shelf stability. Has two triggers: one to purge your bottle with CO2, and one to start filling. All components in contact with liquid are stainless steel or silicone.
  8. Long cylindrical hop bomb for dry hopping in keg
    $19.90

    Long cylindrical hop bomb for dry hopping in keg

    Long cylindrical hop bomb for kegging - perfect for dry hopping in the keg. Only fill to no more than 50% by volume - hop pellets expand significantly when wet.

    Dimensions: 7cm diameter, 29cm length
  9. 5 in 1 Faucet Spanner/Wrench 5 in 1 Faucet Spanner/Wrench
    $8.00

    5 in 1 Faucet Spanner/Wrench

    This handy tool is exactly what you need to fit numerous dispensing applications: - The 27mm nut to attach the tap to your font. - The ring collar that tightens the faucet to the tap shank. - The type 30 nut to attach your regulator to your CO2 bottle - The FFL fitting to go onto an MFL connection - A bottle opener
  10. Gas Ball Lock Post with 5/8" Thread
    $19.00

    Gas Ball Lock Post with 5/8" Thread

    Gas Ball Lock Post with 5/8" Thread. These are a very popular accessory that allows you to convert a commercial keg coupler with 5/8" thread to a standard corny disconnect gas post. This is the simplest way to allow you to serve beer from commercial kegs in a standard homebrew kegerator or keezer without modifying your beer and gas lines.