74g CO2 Cartridge | The Big Bulb | (5/8-18UNF Thread).

This CO2 Cartridge has a much larger thread than the standard 16g bulbs. It will require a different bushing if you are to use it with the 360 Core Mini Regulator. It does not suit other regulators in the KegLand range.

Traditional analogue gauges require a small capillary mechanism where a small pipe expands and unravels under pressure. This in turn drives a mechanical cog to rotate the gauge needle.  This age old technique works quite well especially in large gauges but as this mechanism is manufactured smaller and smaller a tradeoff between accuracy and size becomes the issue.  With very small gauges such as a 27mm x 27mm Mini Gauge it's difficult to make them better than 10% accuracy due to the physical constraints of the mechanical components.

This Portable CO2 Kit allows you to take full advantage of your kegs!

Dispensing a perfectly carbonated brew just got even easier.

Inert Gas Regulator for Disposable Cylinders (N2 - Nitrogen, Ar - Argon, CO2 Compatible with M10 Thread).

High Capacity Disposable Nitrogen (N2) Gas Cylinder - 1.43L - 110Bar.

A CO2 Gas Cylinder Holder for securing one cylinder.

Simply mount onto the wall or similar (screws not included) and use the chain to wrap around the cylinder.

Need to set two different CO2 pressures for different beers on tap? Then you'll need two regulators to do it properly. With this MK4 Dual Pressure Regulator you'll be able to screw it into your CO2 bottle and fire away with two different pressures. No need to removing the High Pressure gauge off one regulator, buying an attachment and joining the two together.

See - Single CO2 Regulator - MK4 for the single version of this regulator.

Duotight 8mm (5/16) one way check valve/non-return valve.


From: Kegland