This is a bulk product - one unit equals 1 meter.

Clear 6mm ID Ledavin PVC tubing perfect for gas or beer line. Capable of fitting a standard disconnect barb, not suitable for push in fittings (without a barb to tube adapter).

We recommend using the 4mm ID version of this where you want the line as short as possible (kegerators, fridge mounted taps etc). This makes a great gas line or when you need to bridge longer distances from keg to tap.

Outer diameter = 10mm

Premium Primary Micromatic, dual guage CO2 Regulator for your kegging system. This model is similar to the Premium Plus but more robust, heavier, and has a different adjustment knob.

Standard nylon washer for ensuring no leaks attaching your regulator to your CO2 bottle.

Outer diameter = 18mm x internal diameter = 11.5mm x 3mm thickness

This Portable CO2 Kit will allow you to take full advantage of your kegs, and mini kegs in particular!

Dispensing a perfectly carbonated brew just got even easier.

With the portable dispensing kit, you can dispense straight from the keg (think party kegs!) which means you can take your home-brew to parties, BBQs and other gatherings.

The kit has an inlet for standard threaded disposable 16g CO2 canisters plus adaptors for Paintball cylinders, 74g CO2 cartridges and SodaStream cylinders!

A stainless steel gauge guard for MK4 regulators (Bump Guard).

Are you like us and bump and push in your kegerator too hard up against the wall with the gas bottle on the back, maybe you've broken a dial in the process of dropping or transporting your gas bottle with the regulator attached. Or perhaps you're in a busy cafe/bar and someone needs to change over the tank and they drop the regulator, smashing the dial. That's money wasted and time spent without whats on tap. If you're like us then you need our tough stainless steel regulator bump, bash, smash and drop (within reason) guard protector. Designed and built by those who are tired of replacing gauge and getting refills for a simple accident.

Unlike most Gauge Guards/Gauge Cages this particular design is made completely from one piece of 304 stainless steel so it won't rust over time.

These can be used with any kegerator as they are compatible with gas bottles with a standard thread. To use it with the new kegerators, you just need to remove the hose barb.

The Type 50 for Nitrogen - MK4 Dual Gauge gas regulator is the only regulator you'll ever need to buy for a deluxe nitrogen stout/cocktail setup. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both PSI and KPA.

This high pressure extension hose is manufactured with Type 30 CO2 Male Thread on one end and a Type 30 CO2 Female thread on the other end.

This useful device will enable you to place your regulator remotely from your gas cylinder.  The reason to do this is so that you can place your gas cylinder on the ground then have your CO2 Regulator mounted to your wall or gas board where it's convenient and at eye level.

This hose is particularly useful if you are making up your own CO2 gas boards.

A new 5kg CO2 (Alloy) bottle, supplied full. This bottle holds more CO2 than most in homebrewing. The bigger the bottle, the cheaper the CO2 refill per kg.

We believe this bottle is priced very competitively.

This product has to be shipped as "Dangerous Goods" so please allow a day or two extra for delivery.