Camlock – Type D female x 1/2 inch female

Stainless Steel - 150psi/11Bar Operating Pressure

Camlock – Type E male x 1/2 inch barb

Stainless Steel - 150psi/11Bar Operating Pressure

1/2 BSP Stainless Steel Nut with a recess for an o-ring

Tri-clamp 1.5 inch / 3.81cm. A quality stainless steel tri-clamp with 1.5" being the most common tri-clamp size.

We also stock tri-clamp seals and a range of fittings that are compatible with this diameter of tri-clamp.

Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.

Tri-clamp 3 inch

Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.

Tri-clamp Cap with 13mm Barb

Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.

A gas shut off valve with built in return check valve and MFL nipple.

A tri-clamp tee fitting. This is the micro version

Stainless steel tri-clamp cap (1.5") to 1/4″ (6.35mm) Hose Barb.

• Made out of 304 Stainless Steel
• 1/4″ OD Hose Barb
• Designed for use with 1/4″ ID tubing