Connections and Valves
-
Stainless Butterfly Hose Clamp - 14-25mm
Stainless steel worm style hose clamp which fits a variety of hose types.
This hose clamp features a butterfly/key type adjustment tab which makes it easier to grip onto and tighten/loosen the clamp without the need for any tools.
If a larger diameter is required then multiple worm type hose clamps can be attached together.
-
Tri-Clamp Pressurised Transfer Fitting
1.5 Inch Tri-Clamp Pressurised Transfer Fitting"
Tri-Clamp (also called Tri Clover) fittings consist of 3 parts: the clamp, the end piece and a silicone gasket. Used in most commercial breweries they are very sturdy. With no nooks or crannies for bacteria/yeast to hide, they clean like a breeze.You can see every surface that meets your precious wort. If that weren't reason enough: they don't leak.Fits Chronical Fermenter Lid - 1.5"
-
Weldless Kettle Ball Valve Kit with Whirlpool Arm, 1/2"
The kit features a 1/2" 2 piece ball valve, a 1/2" barb and a weldless kettle bulkhead. The inner barbed elbow is 3/8". This equipment will allow you to achieve a perfect whirlpool in your Kettle. Simply pump your wort from your ball valve into this piece which will jet around the inside of the kettle forming a strong whirlpool.Out of Stock -
Camlock – Type C female x 1/2 inch barb
Camlock - Female to 1/2" Barb (C Type).
Camlock fittings provide an easy way to make connections between your kettles, chillers, pumps, and other parts of your brewery.
Made from: Stainless Steel 316 -
Camlock – Type F male x 1/2 inch male
Camlock – Type F male x 1/2 inch male
Stainless Steel - 150psi/11Bar Operating Pressure -
Camlock – Type A male x 1/2 inch female
Camlock - Male to 1/2" Female (A Type).
Camlock fittings provide an easy way to make connections between your kettles, chillers, pumps, and other parts of your brewery.
Made from: Stainless Steel 316 -
Camlock – Type B female x 1/2 inch male
Camlock – Type B female x 1/2 inch male
Stainless Steel - 150psi/11Bar Operating Pressure