Connections and Valves

  1.  Quick Disconnect - Male to 1/2" Male BSP  Quick Disconnect - Male to 1/2
    $9.00

    Quick Disconnect - Male to 1/2" Male BSP

    Quick Disconnect - Male to 1/2" Male BSP Fitting. Fits our Female Quick Disconnect.
  2. 1.5” Tri-Clamp cap with 1/2” BSP male
    $28.40

    1.5” Tri-Clamp cap with 1/2” BSP male

    1.5” Tri-Clamp cap with 1/2” BSP male
  3. 1.5” Tri-Clamp cap with 1” BSP male
    $35.00

    1.5” Tri-Clamp cap with 1” BSP male

    1.5” Tri-Clamp cap with 1” BSP male
  4. 1.5” Tri-Clamp cap with 3/4” BSP female
    $17.80

    1.5” Tri-Clamp cap with 3/4” BSP female

    1.5” Tri-Clamp cap with 3/4” BSP female
  5. 1/2" BSP Male Thread x 1/2" Female 90 Degree Elbow Fitting
    $16.60

    1/2" BSP Male Thread x 1/2" Female 90 Degree Elbow Fitting

    1/2" BSP Male Thread x 1/2" Female 90 Degree Elbow Fitting
  6. 1/2" Inch BSP 316 stainless hex Back Nut
    $6.45

    1/2" Inch BSP 316 stainless hex Back Nut

    Used in conjunction with a hex nipple, washer and ball valve assembly.
  7. 1/2" Inch BSP 316 stainless Hex Nipple
    $9.00

    1/2" Inch BSP 316 stainless Hex Nipple

    Used for connecting ball valves to weld-less vessels.
  8. 1/2" Inch Stainless steel Flat Washer
    $2.00

    1/2" Inch Stainless steel Flat Washer

    Good for hex nuts and nipples, and putting pressure on seals.
  9. 12.7mm Stainless Steel Compression Fitting 1/2” BSP 12.7mm Stainless Steel Compression Fitting 1/2” BSP
    $10.00

    12.7mm Stainless Steel Compression Fitting 1/2” BSP

    A 12.7mm compression fitting with 1/2" BSP thread.

    These compression fittings are commonly used with immersion chillers to quickly disconnect the liquid hosing for storage and ease of cleaning.

  10. 14mm Stainless Compression Fitting to 1/2 inch BSP Male
    $9.00

    14mm Stainless Compression Fitting to 1/2 inch BSP Male

    14mm Stainless Compression Fitting to 1/2 inch BSP Male